Wind Power Generation
★Exhibit Content: Wind Power Generation ★Interaction: Electromechanical Interaction ★Operation: ① Press the start button, and the fan starts operating; ② The wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Exhibit Description: The main equipment of the exhibit is fixed inside a protective cover, effectively ensuring the safety of visitors and the equipment. At the same time, the design organically combines the fan, generator, and light bulb to form a complete set of equipment. When visitors participate, they press the start button, the fan starts operating, the wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Scientific Principle: The principle of wind power generation is to use wind to drive the rotation of windmill blades, and then through a speed increaser to increase the rotation speed, thereby prompting the generator to generate electricity. That is, the kinetic energy of air flow acts on the impeller, converting kinetic energy into mechanical energy, thereby driving the impeller to rotate. If the rotating shaft of the impeller is connected to the rotating shaft of the generator, it will drive the generator to produce electricity. According to current windmill technology, a breeze speed of about three meters per second (the level of a breeze) is sufficient to start generating electricity.
Options
- 0.75*0.75*1.2m 0.75*0.75*1.2mOverall Dimensions: 0.75*0.75*1.2m Brand: KexMall Model: PopsciCat-Ecological-068 1. Materials: ① Exhibit stand frame: 20 square tube, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Description plate, graphic panel: 5mm thick acrylic UV printing ④ Protective cover: colored + high-transparency acrylic material ⑤ Maintenance door: 2.0mm cold-rolled sheet surface baked paint ⑥ Demonstration device bracket: 304 stainless steel ⑦ Lighting: LED bulb ⑧ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 type PLC controller with protection specially for science exhibits ② Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ③ Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ④ Fan: high-speed silent fan ⑤ Windmill: custom-made 3. Installation Requirements: ① Power requirement: AC100-240V, 50/60Hz300W (standard three-wire socket) ② Installation base: direct placement ③ Entry passage: door frame dimensions (width×height) ≥1.2m×1.9m, continuous turning interval ≥1.5m ④ Maintenance access: not required
★Exhibit Content: Wind Power Generation ★Interaction: Electromechanical Interaction ★Operation: ① Press the start button, and the fan starts operating; ② The wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Exhibit Description: The main equipment of the exhibit is fixed inside a protective cover, effectively ensuring the safety of visitors and the equipment. At the same time, the design organically combines the fan, generator, and light bulb to form a complete set of equipment. When visitors participate, they press the start button, the fan starts operating, the wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Scientific Principle: The principle of wind power generation is to use wind to drive the rotation of windmill blades, and then through a speed increaser to increase the rotation speed, thereby prompting the generator to generate electricity. That is, the kinetic energy of air flow acts on the impeller, converting kinetic energy into mechanical energy, thereby driving the impeller to rotate. If the rotating shaft of the impeller is connected to the rotating shaft of the generator, it will drive the generator to produce electricity. According to current windmill technology, a breeze speed of about three meters per second (the level of a breeze) is sufficient to start generating electricity.
- 0.9*0.7*1.2m 0.9*0.7*1.2mOverall Dimensions: 0.9*0.7*1.2m Brand: KexMall Model: PopsciCat-Ecological-069 1. Materials: ① Exhibit stand frame: 20 square tube, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Description plate, graphic panel: 5mm thick acrylic UV printing ④ Protective cover: colored + high-transparency acrylic material, using hot bending process, smooth edges, stable structure ⑤ Maintenance door: 2.0mm cold-rolled sheet surface baked paint ⑥ Demonstration device bracket: 304 stainless steel ⑦ Lighting: LED bulb ⑧ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 type PLC controller with protection specially for science exhibits ② Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ③ Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ④ Fan: high-speed silent fan ⑤ Windmill: custom-made 3. Installation Requirements: ① Power requirement: AC100-240V, 50/60Hz500W (standard three-wire socket) ② Installation base: direct placement ③ Entry passage: door frame dimensions (width×height) ≥1.2m×1.9m, continuous turning interval ≥1.5m ④ Maintenance access: not required
★Exhibit Content: Wind Power Generation ★Interaction: Electromechanical Interaction ★Operation: ① Press the start button, and the fan starts operating; ② The wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Exhibit Description: The main equipment of the exhibit is fixed inside a protective cover, effectively ensuring the safety of visitors and the equipment. At the same time, the design organically combines the fan, generator, and light bulb to form a complete set of equipment. When visitors participate, they press the start button, the fan starts operating, the wind drives the wind turbine to run, and the generator then drives the LED light to work. ★Scientific Principle: The principle of wind power generation is to use wind to drive the rotation of windmill blades, and then through a speed increaser to increase the rotation speed, thereby prompting the generator to generate electricity. That is, the kinetic energy of air flow acts on the impeller, converting kinetic energy into mechanical energy, thereby driving the impeller to rotate. If the rotating shaft of the impeller is connected to the rotating shaft of the generator, it will drive the generator to produce electricity. According to current windmill technology, a breeze speed of about three meters per second (the level of a breeze) is sufficient to start generating electricity.
- 1.1×1.3×1.2m 1.1×1.3×1.2mDimensions (L×W×H): 1.1×1.3×1.2m Brand: KexMall Model: PopsciCat-Ecological-070 1. Materials: ① Exhibit stand: frame 2mm cold-rolled steel plate, enclosure 2.0mm cold-rolled steel plate, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Description plate: 5mm thick acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled steel plate surface baked paint ⑤ Protective mesh cover: stainless steel metal protective mesh ⑥ Fan blades: high-strength engineering plastic ⑦ Manual air blower housing: ABS engineering plastic 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 type PLC controller with protection specially for science exhibits ② Micro wind turbine generator set: multiple fan models + micro generators ③ Manual air blowing module: two sets of manual air blower mechanisms ④ Digital display module: LED digital display, real-time countdown time display ⑤ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ⑥ Switching power supply: AC-DC-60-12/24 input AC100-240V, 50/60Hz, output DC24V ⑦ Built-in electrical control box: integrated air switch, terminal block module 3. Installation Requirements: ① Power requirement: AC100-240V, 50/60Hz200W (standard three-wire socket) ② Installation base: operation table placed directly on the ground, ground kept level ③ Entry passage: door frame dimensions (width×height) ≥1.5m×1.4m, continuous turning interval ≥2.5m ④ Maintenance access: not required
★Exhibit Content: Energy Conversion from Wind Energy to Mechanical Energy to Electrical Energy ★Interaction: Electromechanical Interaction ★Operation: 1. Press the "Start" button, rotate the manual air blower to blow the fan blades; 2. Observe the light bulb below the fan to see the relationship between generated electricity and rotation speed. ★Exhibit Description: This exhibit mainly consists of an arc-shaped display cabinet, two manual air blowers, multiple wind turbine models, metal protective mesh cover, digital display module, operation buttons, and science description plate. It is a recommended exhibit from the PopsciCat Exhibit Store. After pressing the start button, visitors rotate the manual air blower to simulate natural wind blowing towards the wind turbine model. The airflow drives the turbine blades to rotate, converting wind energy into mechanical energy, which then drives the internal micro-generator to produce electricity. The exhibit simulates the working process of a real wind power station, allowing two people to participate simultaneously, visualizing the abstract wind power generation process, and helping visitors understand the conversion logic of clean energy. ★Scientific Principle: Wind power generation utilizes the kinetic energy carried by air flow. The airflow impacts the turbine blades, converting wind energy into mechanical energy of blade rotation; the turbine shaft drives the internal rotor of the generator to cut magnetic field lines, further converting mechanical energy into electrical energy based on electromagnetic induction. Wind speed directly affects blade rotation speed. The higher the rotation speed, the greater the generator output, and the percentage value on the display changes accordingly, intuitively reflecting the impact of wind energy magnitude on power output.
- 1.1×0.9×2.2m 1.1×0.9×2.2mDimensions (L×W×H): 1.1×0.9×2.2m Brand: KexMall Model: PopsciCat-Ecological-071 1. Materials: ① Exhibit stand: frame 2mm cold-rolled steel plate, enclosure 2.0mm cold-rolled steel plate, surface baked paint ② Tabletop: artificial stone tabletop, thickness ≥12mm ③ Description plate: 5mm thick acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled steel plate surface baked paint ⑤ Protective mesh: stainless steel metal protective mesh ⑥ Wind turbine model: high-strength engineering plastic ⑦ Back panel: sheet metal substrate + UV printing picture 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K2 type PLC controller with protection specially for science exhibits ② Blowing module: two sets of adjustable angle manual air cannon blowing mechanisms ③ Power generation model group: Q-type, three-blade, multi-blade, H-type four sets of micro wind turbine generator sets with different structures ④ Light column display module: multiple sets of LED light column strips, correspondingly displaying the power output level of each model ⑤ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ⑥ Switching power supply: AC-DC-60-12/24 input AC100-240V, 50/60Hz, output DC24V ⑦ Built-in electrical control box: integrated air switch, terminal blocks and signal acquisition module 3. Installation Requirements: ① Power requirement: AC100-240V, 50/60Hz500W (standard three-wire socket) ② Installation base: operation table placed directly on the ground, ground kept level ③ Entry passage: door frame dimensions (width×height) ≥1.5m×1.9m, continuous turning interval ≥2.5m ④ Maintenance access: not required
★Exhibit Content: Comparison of Wind Power Generation with Different Wind Turbine Structures ★Interaction: Electromechanical Interaction ★Operation: 1. Press the "Start" button, adjust the direction of the fan outlet; 2. Blow different wind turbine models and observe the lighting changes of the LED light bars behind. ★Exhibit Description: This exhibit consists of a circular operation table cabinet, two manual air cannon blowing mechanisms, four wind turbine models with different structures, metal protective mesh, back panel LED light column display module, operation buttons, and 5mm thick acrylic UV printing description plate. It is a recommended exhibit from the PopsciCat Exhibit Store. Visitors press the start button, control the manual air cannon to blow airflow, respectively blowing towards Q-type, three-blade, multi-blade, and H-type wind turbine models. Different wind turbines driven by airflow produce different power outputs, and the corresponding LED light columns on the back panel light up, intuitively comparing the power generation performance differences of different wind turbine structures. The exhibit visualizes the abstract wind energy conversion process, allowing two people to interact simultaneously, helping visitors understand the impact of wind turbine blade configuration on power generation efficiency. ★Scientific Principle: Wind power generation relies on airflow to drive the rotation of wind turbine blades, converting wind energy into mechanical energy of blade rotation, and then through a speed increaser to drive the generator, converting mechanical energy into electrical energy through electromagnetic induction. Wind turbines with different blade numbers and different shapes have different abilities to capture wind energy. Under the same wind speed conditions, the output electrical energy is significantly different. The height of the LED light columns on the back panel intuitively reflects the power output of each model, thereby comparing the actual working performance of various wind turbines.
- 2.8×2.2×2.4m 2.8×2.2×2.4mDimensions (L×W×H): 2.8×2.2×2.4m Brand: KexMall Model: PopsciCat-Ecological-072 1. Materials: ① Exhibit stand column base: frame 2mm cold-rolled steel plate, enclosure 2.0mm cold-rolled steel plate, surface green baked paint ② Tabletop: artificial stone tabletop, thickness ≥12mm ③ Description plate: 5mm thick acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled steel plate surface baked paint ⑤ Fan blades: high-strength engineering plastic ⑥ Protective components: metal protective grille 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 type PLC controller with protection specially for science exhibits ② Blowing module: rotatable steering blower mechanism with turntable adjustment component ③ Wind turbine model group: five sets of vertical micro wind turbine generator sets with different structures ④ Digital display module: five sets of LED digital tubes, respectively displaying real-time power generation data of each wind turbine ⑤ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ⑥ Switching power supply: AC-DC-60-12/24 input AC100-240V, 50/60Hz, output DC24V ⑦ Built-in electrical control box: integrated air switch, terminal blocks, signal acquisition module 3. Installation Requirements: ① Power requirement: AC100-240V, 50/60Hz500W (standard three-wire socket) ② Installation base: exhibit placed on the ground, ground kept level and firm ③ Entry passage: door frame dimensions (width×height) ≥2.9m×2.5m, continuous turning interval ≥2.5m ④ Maintenance access: not required
★Exhibit Content: Comparison of Power Generation Performance of Various Vertical Wind Turbine Models ★Interaction: Electromechanical Interaction ★Operation: 1. Press the button to start the fan; 2. Rotate the turntable to adjust the direction of the blower so that it blows towards one of the wind wheels; 3. Observe the power generation efficiency of different windmills displayed on the digital tube. ★Exhibit Description: This exhibit consists of a central blowing operation table, five sets of vertical wind turbine models with different structures, column bases, multiple digital display modules, operation turntable, button components, and 5mm thick acrylic UV printing description plate. It is a recommended exhibit from the PopsciCat Exhibit Store. Visitors press the start button, rotate the central turntable to adjust the blower outlet direction, and the airflow blows towards different wind turbine models. Each wind turbine is driven by wind to rotate, converting wind energy into electrical energy, and the digital tube on the corresponding column displays the power generation value in real time. The exhibit intuitively presents the differences in power output of wind turbines with different blade structures, allowing visitors to directly compare the working effects of various wind turbines and understand the actual impact of wind turbine selection and blade structure on wind power generation. ★Scientific Principle: Wind power generation relies on wind to drive the rotation of windmill blades, and through a speed increaser to increase the rotation speed, driving the generator to generate electricity. In real environments, wind speeds of about 3 meters per second can achieve power generation, and the wind magnitude directly determines the power generation benefit. Wind turbines with different blade sizes and configurations have different applicable wind speed ranges. If the wind speed is too low, power generation is not possible; if the wind speed is too high, equipment damage may occur. Each type of wind turbine has a corresponding applicable wind speed range. The exhibit intuitively reflects the performance differences of various wind turbines through power generation values under the same wind speed.
Review
Principle Display: ★★★ Interaction Effect: ★★★ Ease of Installation: ★★★★★ Durability: ★★★★ Overall Rating: ★★★★