Electromagnetic Accelerator
★Exhibit Content: Electromagnetic accelerator, electromagnetic launch ★Interaction: Electromechanical interaction ★Operation: Press the "Start" button and observe the movement of the metal ball in the track after power is turned on. ★Exhibit Description: The exhibit consists of a protective cover, support base, track, small ball, acceleration coil modules, electric push rod, etc. When the power is turned on, the metal ball will move back and forth along the track between the coils, and its speed will increase continuously. ★Scientific Principle: Why does the ball move and get faster after power is turned on? The exhibit uses a metal ball to simulate electrons and other elementary particles. Through continuous acceleration driven by electromagnetic coils, it intuitively simulates and demonstrates the working process of an electromagnetic accelerator. In modern society, in addition to particle accelerators in high-energy physics experiments, such electromagnetic accelerators are also used in maglev trains, electromagnetic railguns, and carrier-based aircraft catapult devices on aircraft carriers, etc.
Options
- 0.75×0.75×1.05 0.75×0.75×1.05Dimensions (unit: m): 0.75×0.75×1.05 Brand: KexMall Model: PopsciCat-ElectroMagnetic-061 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *4 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *4 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic accelerator, electromagnetic launch ★Interaction: Electromechanical interaction ★Operation: Press the "Start" button and observe the movement of the metal ball in the track after power is turned on. ★Exhibit Description: The exhibit consists of a protective cover, support base, track, small ball, acceleration coil modules, electric push rod, etc. When the power is turned on, the metal ball will move back and forth along the track between the coils, and its speed will increase continuously. ★Scientific Principle: Why does the ball move and get faster after power is turned on? The exhibit uses a metal ball to simulate electrons and other elementary particles. Through continuous acceleration driven by electromagnetic coils, it intuitively simulates and demonstrates the working process of an electromagnetic accelerator. In modern society, in addition to particle accelerators in high-energy physics experiments, such electromagnetic accelerators are also used in maglev trains, electromagnetic railguns, and carrier-based aircraft catapult devices on aircraft carriers, etc.
- Φ1.2*1.2m · Style 1 Φ1.2*1.2mDimensions: Φ1.2*1.2m Brand: KexMall Model: PopsciCat-ElectroMagnetic-062 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *4 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *4 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic accelerator ★Interaction: Electromechanical interaction ★Operation: Press the "Start" button and observe the movement of the metal ball in the track after power is turned on. ★Exhibit Description: The exhibit consists of acceleration coils, track, ball stopping mechanism, protective cover, etc. When the visitor presses the "Start" button, the ball stopping mechanism releases the metal ball, and after power is turned on, the metal ball in the track will spin faster and faster. ★Scientific Principle: Why does the ball move and get faster after power is turned on? The exhibit uses a metal ball to simulate electrons and other elementary particles. Through continuous acceleration driven by electromagnetic coils, it intuitively simulates and demonstrates the working process of an electromagnetic accelerator. In modern society, in addition to particle accelerators in high-energy physics experiments, such electromagnetic accelerators are also used in maglev trains, electromagnetic railguns, and carrier-based aircraft catapult devices on aircraft carriers, etc.
- Φ1.2*1.2m · Style 2 Φ1.2*1.2mDimensions: Φ1.2*1.2m Brand: KexMall Model: PopsciCat-ElectroMagnetic-063 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *6 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *4 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic acceleration principle ★Interaction: Electromechanical interaction ★Operation: 1. Press the "Start" button; 2. Observe the continuous acceleration of the metal ball in the circular track, and at the same time observe the small ball rolling back and forth on the curved track above. ★Exhibit Description: The exhibit consists of a circular platform, circular track, curved track, electromagnetic acceleration coil set, ball stopping mechanism, transparent protective cover, and control buttons. It is a recommended exhibit from the KexMall exhibit mall. When the visitor presses the start button, the ball stopping mechanism releases the metal ball. Multiple electromagnetic coils are energized in sequence to generate a magnetic field, continuously exerting magnetic force on the metal ball, and the ball accelerates continuously in the circular track; the high-speed ball enters the curved track above, rolling back and forth, intuitively simulating the physical process of particle acceleration in an electromagnetic field. ★Scientific Principle: The exhibit uses a metal ball to simulate electrons and other microscopic particles. By energizing electromagnetic coils in sequence to generate instantaneous magnetic fields, it continuously drives the metal ball with magnetic force to achieve continuous acceleration, intuitively demonstrating the working principle of an electromagnetic accelerator. In reality, this principle is widely used in high-energy physics particle accelerators, electromagnetic railguns, electromagnetic catapult devices for carrier-based aircraft, maglev trains, and other fields.
- Φ1.2*1.2m · Style 3 Φ1.2*1.2mDimensions: Φ1.2*1.2m Brand: KexMall Model: PopsciCat-ElectroMagnetic-064 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *6 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *4 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic acceleration principle ★Interaction: Electromechanical interaction ★Operation: 1. Press the "Start" button; 2. Observe the continuous acceleration of the metal ball in the circular track, and at the same time observe the small ball rolling back and forth on the curved track above. ★Exhibit Description: The exhibit consists of a circular platform, circular track, curved track, electromagnetic acceleration coil set, ball stopping mechanism, transparent protective cover, and control buttons. It is a recommended exhibit from the KexMall exhibit mall. When the visitor presses the start button, the ball stopping mechanism releases the metal ball. Multiple electromagnetic coils are energized in sequence to generate a magnetic field, continuously exerting magnetic force on the metal ball, and the ball accelerates continuously in the circular track; the high-speed ball enters the curved track above, rolling back and forth, intuitively simulating the physical process of particle acceleration in an electromagnetic field. ★Scientific Principle: The exhibit uses a metal ball to simulate electrons and other microscopic particles. By energizing electromagnetic coils in sequence to generate instantaneous magnetic fields, it continuously drives the metal ball with magnetic force to achieve continuous acceleration, intuitively demonstrating the working principle of an electromagnetic accelerator. In reality, this principle is widely used in high-energy physics particle accelerators, electromagnetic railguns, electromagnetic catapult devices for carrier-based aircraft, maglev trains, and other fields.
- Φ1.0*1.2m Φ1.0*1.2mDimensions: Φ1.0*1.2m Brand: KexMall Model: PopsciCat-ElectroMagnetic-065 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *8 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *6 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic acceleration principle ★Interaction: Electromechanical interaction ★Operation: 1. Press the "Start" button; 2. Observe the continuous acceleration of the metal ball in the circular track, and at the same time observe the small ball rolling back and forth on the curved track above. ★Exhibit Description: The exhibit consists of a circular platform, circular track, curved track, electromagnetic acceleration coil set, ball stopping mechanism, transparent protective cover, and control buttons. It is a recommended exhibit from the KexMall exhibit mall. When the visitor presses the start button, the ball stopping mechanism releases the metal ball. Multiple electromagnetic coils are energized in sequence to generate a magnetic field, continuously exerting magnetic force on the metal ball, and the ball accelerates continuously in the circular track; the high-speed ball enters the curved track above, rolling back and forth, intuitively simulating the physical process of particle acceleration in an electromagnetic field. ★Scientific Principle: The exhibit uses a metal ball to simulate electrons and other microscopic particles. By energizing electromagnetic coils in sequence to generate instantaneous magnetic fields, it continuously drives the metal ball with magnetic force to achieve continuous acceleration, intuitively demonstrating the working principle of an electromagnetic accelerator. In reality, this principle is widely used in high-energy physics particle accelerators, electromagnetic railguns, electromagnetic catapult devices for carrier-based aircraft, maglev trains, and other fields.
- 1.4*0.7*1.3m 1.4*0.7*1.3mDimensions: 1.4*0.7*1.3m Brand: KexMall Model: PopsciCat-ElectroMagnetic-066 1. Materials: ① Base: frame 2mm cold-rolled sheet, enclosure 2.0mm cold-rolled sheet, surface baked paint ② Tabletop: Kelesi artificial stone, thickness ≥12mm, with flame-retardant board underneath ③ Instruction plate, graphic panel: 5mm acrylic UV printing ④ Maintenance door: 2.0mm cold-rolled sheet with surface baked paint ⑤ Protective cover: transparent acrylic + orange acrylic ⑥ Electrical control box: cold-rolled sheet baked paint box, containing control circuit, switching power supply, circuit breaker, terminal blocks, etc. 2. Main Configuration: ① Electrical control: electrical logic control system, equipped with Guanjian® K1 PLC controller with protection specially for science exhibits ② Switching power supply: AC-DCS-60-12/24 input AC100-240V, 50/60Hz, output power 60W ③ Button: self-resetting 22mm stainless steel metal button with ring light; LED voltage not higher than 12V ④ Electromagnetic coil: Xi'an Shendu Hudong custom-made *15 ⑤ Automatic ball retraction system: HF-PANDA push rod motor 30mm stroke ⑥ Position sensor *12 3. Exhibition Requirements: ① Power requirement: AC100-240V, 50/60Hz 200W (standard three-wire socket) ② Installation base: place directly ③ Entry passage: door frame size (width×height) ≥1.0m×1.9m, continuous turning interval in passage ≥1.2m ④ Maintenance access: not required
★Exhibit Content: Electromagnetic accelerator ★Interaction: Electromechanical interaction ★Operation: Press the "Start" button and observe the movement of the metal ball in the track after power is turned on. ★Exhibit Description: The exhibit consists of acceleration coils, track, ball stopping mechanism, protective cover, etc. When the visitor presses the "Start" button, the ball stopping mechanism releases the metal ball, and after power is turned on, the metal ball in the track will spin faster and faster. ★Scientific Principle: Why does the ball move and get faster after power is turned on? The exhibit uses a metal ball to simulate electrons and other elementary particles. Through continuous acceleration driven by electromagnetic coils, it intuitively simulates and demonstrates the working process of an electromagnetic accelerator. In modern society, in addition to particle accelerators in high-energy physics experiments, such electromagnetic accelerators are also used in maglev trains, electromagnetic railguns, and carrier-based aircraft catapult devices on aircraft carriers, etc.
Review
Principle Display: ★★★★ Interaction Effect: ★★★ Ease of Installation: ★★★★★ Durability: ★★★★ Overall Rating: ★★★★